yandex

FIRE RATED SERIES

ADHESIVES & GLUES

SEALANTS

PU FOAMS

COATING SYSTEMS

AEROSOLS

AUTOMOTIVE; REPAIR, CARE, PROTECTIVE PRODUCTS

INDUSTRIAL; REPAIR, CARE, PROTECTIVE PRODUCTS

ANAEROBICS

SPRAY PAINTS

ACCESSORIES

Next Product L243 Threadlocker (Medium Strength) Previous Product PS257 Pipe Sealant (With Teflon)

L222 Threadlocker (Low Strength)
L222 Threadlocker (Low Strength)

Akfix L222 is a low-strength, easy to remove screw lock. Works on all metals, especially good on low strength metals which could damage during disassembly, e.g. brass or aluminium.

L222 Threadlocker (Low Strength)

Product Information


Properties
  • Ideal for low-strength thread-locking of adjusting screws.
  • Easy to remove screw lock.
  • Especially good on low strength metals which could damage during disassembly, e.g. brass or aluminium.
Applications Area
  • Clean male and female threads before assembly with an absorbent tissue paper to remove any cutting oil.
  • Apply the adhesive with a 360 turn to leading threads of the male and female fittings.
  • Use an absorbent tissue paper to wipe off excess jointing compound in the direction of the thread.
  • Assembly parts and hold on for 24 hours at 22-24°C to ensure full curing of jointing compound.
  • For disassembly, use hand tools to remove mating parts. When it is hard to dissemble at room temperature, apply local heat until reaching 250°C and disassemble while hot. Then, remove any residual cured adhesive mechanically and clean parts with a proper solvent, acetone.
Package
S.Code P.Code Type Volume BoxQty B.Pallet Barcode
L222_01 - Threadlocker 50 ml 120 - -
L222_02 - Threadlocker 250 ml 36 - -