yandex

FIRE RATED SERIES

ADHESIVES & GLUES

SEALANTS

PU FOAMS

COATING SYSTEMS

AEROSOLS

AUTOMOTIVE; REPAIR, CARE, PROTECTIVE PRODUCTS

INDUSTRIAL; REPAIR, CARE, PROTECTIVE PRODUCTS

ANAEROBICS

SPRAY PAINTS

ACCESSORIES

Next Product L270 Threadlocker (High Strength) Previous Product L222 Threadlocker (Low Strength)

L243 Threadlocker (Medium Strength)
L243 Threadlocker (Medium Strength)

Akfix L243 is a medium strength thixotropic anaerobic thread locker. The product cures when confined in the absence of air between close-fitting metal surfaces.

L243 Threadlocker (Medium Strength)

Product Information


Properties
  • Formulated to lock all metric and imperial nuts and bolts
  • Prevents vibration loosening and leakage through the threads
  • Slightly oil tolerant; it will bond some ‘as received’ parts, but best results are obtained with clean substrates.
  • The thixotropic nature of the product prevents run off, dripping and migration after assembly.
  • Typically used on mounting bolts, housing screws, etc.
  • Prevents corrosion of assembled parts.
Applications Area
  • Clean male and female threads before assembly with an absorbent tissue paper to remove any cutting oil.
  • Apply the adhesive with a 360 turn to leading threads of the male and female fittings.
  • Use an absorbent tissue paper to wipe off excess jointing compound in the direction of the thread.
  • Assembly parts and hold on for 24 hours at 22-24°C to ensure full curing of jointing compound.
  • For disassembly, use hand tools to remove mating parts. When it is hard to dissemble at room temperature, apply local heat until reaching 250°C and disassemble while hot. Then, remove any residual cured adhesive mechanically and clean parts with a proper solvent, acetone.
Package
S.Code P.Code Type Volume BoxQty B.Pallet Barcode
L243_01 - Threadlocker 50 ml 120 - -
L243_02 - Threadlocker 250 ml 36 - -