yandex

FIRE RATED SERIES

ADHESIVES & GLUES

SEALANTS

PU FOAMS

COATING SYSTEMS

AEROSOLS

AUTOMOTIVE; REPAIR, CARE, PROTECTIVE PRODUCTS

INDUSTRIAL; REPAIR, CARE, PROTECTIVE PRODUCTS

ANAEROBICS

SPRAY PAINTS

ACCESSORIES

Next Product L222 Threadlocker (Low Strength) Previous Product HP242 Pipe Sealant (High Pressure)

PS257 Pipe Sealant (With Teflon)
PS257 Pipe Sealant (With Teflon)

Akfix PS257 is a high viscosity and medium strength anaerobic pipe sealant. Thixotropic formulation reduces run-off and migration of the product before assembly.

PS257 Pipe Sealant (With Teflon)

Product Information


Properties
  • It can be easily applied to threaded joints and removed easily with hand tools.
  • With its specialized formulation, PS257 can be used applications where high pressure proof or oil resistance is required.
  • The product resists very high temperatures after full curing.
  • Especially suitable for H-thick metal threaded joints according to EN 751-1 standard.
  • The product fills high distance gaps and gives perfect results on wide-diameter (wider than 0.5mm) applications.
Applications Area
  • Clean male and female threads before assembly with an absorbent tissue paper to remove any cutting oil.
  • Apply the adhesive with a 360 turn to leading threads of the male and female fittings.
  • Use an absorbent tissue paper to wipe off excess jointing compound in the direction of the thread.
  • Assembly parts and hold on for 24 hours at 22-24°C to ensure full curing of jointing compound.
  • For disassembly, use hand tools to remove mating parts. When it is hard to dissemble at room temperature, apply local heat until reaching 250°C and disassemble while hot. Then, remove any residual cured adhesive mechanically and clean parts with a proper solvent, acetone.
Package
S.Code P.Code Type Volume BoxQty B.Pallet Barcode
PS257_01 - Pipe 50 ml 120 - -
PS257_02 - Pipe 250 ml 36 - -