L243 Threadlocker (Medium Strength)
L243 Threadlocker (Medium Strength)

L243 Threadlocker (Medium Strength)

Akfix L243 is a medium strength thixotropic anaerobic thread locker. The product cures when confined in the absence of air between close-fitting metal surfaces.

  • Formulated to lock all metric and imperial nuts and bolts
  • Prevents vibration loosening and leakage through the threads
  • Slightly oil tolerant; it will bond some ‘as received’ parts, but best results are obtained with clean substrates.
  • The thixotropic nature of the product prevents run off, dripping and migration after assembly.
  • Typically used on mounting bolts, housing screws, etc.
  • Prevents corrosion of assembled parts.
Applications Area
  • Clean male and female threads before assembly with an absorbent tissue paper to remove any cutting oil.
  • Apply the adhesive with a 360 turn to leading threads of the male and female fittings.
  • Use an absorbent tissue paper to wipe off excess jointing compound in the direction of the thread.
  • Assembly parts and hold on for 24 hours at 22-24°C to ensure full curing of jointing compound.
  • For disassembly, use hand tools to remove mating parts. When it is hard to dissemble at room temperature, apply local heat until reaching 250°C and disassemble while hot. Then, remove any residual cured adhesive mechanically and clean parts with a proper solvent, acetone.

L243_01-Threadlocker50 ml120--
L243_02-Threadlocker250 ml36--

Joint Sealant Calculator
Joint Sealant Calculator
Joint Sealant Calculator
App Store Google Play Certificates

705 Fast & Strong Adhesive AST Akkim Smart Technology Akfix A40 Magic 610 PU Express Montage Adhesive
Akfix Coating Logo
Akkim Logo

Address : Yeşilbayır Mah. Şimşir Sk. No: 22 Hadımköy / İstanbul
Phone : + 90 212 771 13 71 Fax : + 90 212 771 38 88
E-Mail : [email protected]
2018 © Copyright Akfix / All Rights Reserved.