PRODUCT SEARCH
line-ok
SELECT LANGUAGE
line-ok
line-ok

HP242 Pipe Sealant (High Pressure)

CATEGORIES SOLUTIONS

HP242 Pipe Sealant (High Pressure)

Akfix HP242 is an easily applied anaerobic low viscosity pipe sealant used in hydraulic & pneumatic fittings with diameters up to 50 mm and servomechanisms.

Properties
  • Does not shrink when fully cured.
  • Shows great resistance to high pressure, vibration, solvents, heat up to 150°C, moisture,and corrosion.
  • Easly applied to hydraulic & pneumatic fittings with diameters up to 50 mm and servomechanisms.
Application Areas
  • Clean male and female threads before assembly with an absorbent tissue paper to remove any cutting oil.
  • Apply the adhesive with a 360 turn to leading threads of the male and female fittings.
  • Use an absorbent tissue paper to wipe off excess jointing compound in the direction of the thread.
  • Assembly parts and hold on for 24 hours at 22-24°C to ensure full curing of jointing compound.
  • For disassembly, use hand tools to remove mating parts. When it is hard to dissemble at room temperature, apply local heat until reaching 150°C and disassemble while hot. Then, remove any residual cured adhesive mechanically and clean parts with a proper solvent, acetone.
Packaging
Stock Code Product Code Type Volume BoxQty
HP242_01 - Pipe 50 ml 120
HP242_02 - Pipe 250 ml 36
Joint Sealant Calculator
line-ok
Width (mm) Depth (mm) Length (mm) Product Packaging Type